Skip to main content
Hyperliquid logo
Perpetuals DEX

Hyperliquid: What It Is, How It Works, Fees and Key Facts

Updated · Crypto Grows News Editorial Team

Hyperliquid is a decentralized exchange for perpetual futures and spot trading that runs on its own layer-1 blockchain. Orders are matched on an on-chain order book (HyperCore), and a separate EVM environment (HyperEVM) hosts smart contracts. Traders deposit USDC, pay gas-free trading fees, and the native token is HYPE. There is no wallet-level KYC, but the web interface restricts some countries.

Key facts

What it isLayer-1 blockchain with an on-chain order book for perpetual futures and spot markets (HyperCore) plus a general-purpose EVM (HyperEVM)as of 2026-11 · source
DeveloperHyperliquid Labs, led by Jeff Yan and a pseudonymous co-founder (iliensinc), who were Harvard classmates; the docs say it is self-funded with no external capitalas of 2026-11 · source
ConsensusHyperBFT, a HotStuff variant; the docs state about 200k orders per second and median end-to-end order latency of 0.2 seconds for co-located clientsas of 2026-11 · source
Base perps fees (tier 0)Taker 0.045%, maker 0.015% of notional; spot taker 0.070%, maker 0.040%as of 2026-11-11 · source
TokenHYPE: maximum supply 1 billion; about 239.4 million circulating, market cap about $17.3 billion, CoinGecko rank 11as of 2026-11-10 · source
Value on the chainDefiLlama lists about $7.7 billion TVL for Hyperliquidas of 2026-11-11 · source
Protocol fees (perps)DefiLlama: about $84.9 million over 30 days and about $1.65 billion since launchas of 2026-11-11 · source
KYC and accessNo identity check to trade through a wallet; the official web interface geoblocks the US and other restricted regions (per third-party summaries of its terms)as of 2026-09 · source

What Hyperliquid is and who runs it

Hyperliquid is a trading venue whose matching engine, margin accounting and settlement all live on a purpose-built blockchain. That differs from DEXs that run as smart contracts on Ethereum or Solana. The chain has two parts: HyperCore, which holds order books, margin state and liquidations, and HyperEVM, a general-purpose EVM environment for ordinary smart contracts. The two share state, so contracts on HyperEVM can read and interact with HyperCore balances.

The software was built by Hyperliquid Labs. Its docs name Jeff Yan and a pseudonymous co-founder, iliensinc, as leaders, describe a team that did proprietary crypto market making from 2020 and moved into DeFi in summer 2022, and state that the company is self-funded and has taken no external capital. Press coverage describes a team of roughly a dozen people. The Hyper Foundation is a separate body that has funded ecosystem work; we could not verify its governance structure from primary documents, so this page does not describe it further.

Brand, chain and token are three different things. "Hyperliquid" is the exchange and the L1 it runs on. HYPE is the native token. The legal operator of the web front end is not named in the sources used for this profile, so we do not name one. Our separate Hyperliquid review covers how we score the platform.

Products: perps, spot, vaults and HIP-3 markets

The core product is perpetual futures: contracts with no expiry that track an index price through periodic funding payments between longs and shorts. Spot trading was added later on the same order book. Orders can be placed from a wallet or an email login, and the docs say trading itself is gasless.

Vaults let users pool money behind a strategy. The protocol vault, Hyperliquidity Provider (HLP), runs market-making strategies, performs liquidations and takes a share of trading fees. The docs call it community-owned and state a lockup of 4 days after your most recent deposit. They do not state a profit-share percentage or describe risks on that page, and depositors share in the vault's losses as well as gains.

HIP-3 (Hyperliquid Improvement Proposal 3) lets third parties deploy their own perpetual markets on HyperCore. A deployer must keep 500,000 HYPE staked, and the docs say that requirement is expected to fall over time. Deployers define the oracle, set leverage limits and can halt and settle markets. This is how non-crypto and newly listed assets reach the venue, and it moves oracle and listing risk onto each deployer. We cover the market-structure angle in our news report on HIP-3.

How trading works: deposits, margin and liquidation

The usual route is: connect an EVM wallet or sign in with email, hold USDC and a little ETH on Arbitrum, deposit USDC through the app, then trade. Email users can send USDC from Arbitrum, Ethereum, Base or Polygon to a deposit address. The docs do not state a minimum deposit or a withdrawal time; they only note possible small gas fees depending on the chain.

Collateral is USDC, held as margin on HyperCore. Positions can be cross or isolated margin, and the docs also describe a portfolio-margin mode. When an account's equity falls below the maintenance requirement, positions are liquidated; the HLP vault takes part in liquidations, and auto-deleveraging exists as a last-resort backstop. Check the live margin tiers on the docs before sizing a position, because maximum leverage differs by asset.

Funding is paid between longs and shorts rather than to the venue. Fees, by contrast, go to the protocol, and a share goes to HYPE buybacks (see the token section).

Fees

Fees depend on a 14-day weighted volume tier and on how much HYPE the account has staked. The base tier is 0.045% taker and 0.015% maker on perps. The top tier (above $7 billion of 14-day volume) is 0.024% taker and 0.000% maker. Maker rebates of -0.001% to -0.003% apply to accounts with a large share of maker volume. Fees are assessed daily in UTC.

Staking HYPE reduces fees by 5% (more than 10 HYPE) up to 40% (more than 500,000 HYPE). HIP-3 deployers can add their own fee share on top, between 0% and 300%, or up to 100% in the docs' "growth mode". Funding payments, spreads and the chain-level cost of deposits and withdrawals are separate costs and are not part of these rates.

Base rates before staking discounts. Source: Hyperliquid docs, fee tiers, checked 2026-11-11. Tier 5 (>$2B) omitted for brevity.
Tier (14-day volume)Perps takerPerps makerSpot takerSpot maker
0 (base)0.045%0.015%0.070%0.040%
1 (>$5M)0.040%0.012%0.060%0.030%
2 (>$25M)0.035%0.008%0.050%0.020%
3 (>$100M)0.030%0.004%0.040%0.010%
4 (>$500M)0.028%0.000%0.035%0.000%
6 (>$7B)0.024%0.000%0.025%0.000%

Countries, KYC and access

The protocol itself is permissionless: a wallet can interact without identity checks, and the docs' onboarding steps contain no KYC stage. Access restrictions apply at the web interface. Third-party guides and press describe US users as geoblocked on the official front end, along with Ontario and sanctioned jurisdictions. Treat the exact country list as unverified and read the current terms before use.

In September 2026 The Block reported that President Trump had said he wanted Hyperliquid to operate in the US in a compliant way, but that US access had not opened. Because a self-custody wallet and a blocked front end can coexist, being technically able to trade does not settle whether it is legal where you live. Readers weighing venue types can start with our DEX versus CEX comparison.

Security model, custody and incidents

Deposits enter through USDC on Arbitrum (the docs' onboarding flow) and balances are then tracked on the Hyperliquid L1, so users depend on the bridge and on the validator set to honor those balances. The docs' audit page lists a Zellic audit of the legacy bridge contract and a separate audit of Circle's HyperEVM contracts, and gives no dates for either. A smart-contract audit is not insurance, and the chain's validator set is a concentrated trust point compared with Ethereum.

Validators run HyperBFT and are chosen by HYPE stake. HYPE staking has a 7-day unstaking queue and, per the docs, automatic slashing is not currently implemented; validators can be jailed for poor responsiveness. For HIP-3 deployers, slashing exists through a stake-weighted validator vote, with up to 100% of deployer stake at risk for faults that cause invalid state or prolonged downtime.

The best-known incident is the March 2025 JELLY episode. Per The Block, accounts built a large position in a thinly traded token's perpetual, the HLP vault took the other side, and validators voted to delist and force-settle the market. The intervention protected the vault but raised questions about how decentralized the venue is, since a small validator group could settle a market at a chosen price. Third-party summaries say position caps were tightened afterward; check Hyperliquid's own incident notes for the current rules.

HYPE token, governance and track record

HYPE has a maximum supply of 1 billion. CoinGecko listed about 239.4 million as circulating and a market cap near $17.3 billion on 2026-11-10 (price $72.25, rank 11). These figures move daily. Secondary sources report that the token launched in late November 2024 with no venture allocation and that 31% of supply went to early users, but we did not confirm the split against a primary document.

Most protocol fees go to an "Assistance Fund" that buys HYPE on the open market, according to third-party analysis; sources disagree on the exact share (97% to 99%) and on cumulative amounts, so we give no total. HYPE is also staked to validators for roughly 2.37% a year at 400 million HYPE staked (docs figure; the rate falls as stake rises).

On usage, DefiLlama shows about $7.7 billion of TVL and about $84.9 million of perps protocol fees over 30 days on 2026-11-11. Our news desk covered the milestone when daily volume topped Binance perps. Past volume is not a guide to future volume.

Risks to weigh

Leveraged perpetuals can lose the full margin in a position quickly, and liquidations on thin markets can be abrupt. Specific protocol risks include validator concentration, bridge dependence, oracle and listing quality on HIP-3 markets, HLP vault drawdowns, and regulatory exposure for US-linked users. Nothing here is investment advice.

Similar services

dydxgmxdrift

Frequently asked questions

Does Hyperliquid require KYC?
The protocol does not ask for identity documents; you connect a wallet or an email login and deposit USDC. The official web interface applies geographic restrictions, including to the US according to third-party reports, so read the current terms. Skipping KYC does not remove tax or legal obligations where you live.
Who owns Hyperliquid?
No single company owns the chain. Hyperliquid Labs, led by Jeff Yan and a pseudonymous co-founder, built the software and says it is self-funded with no venture capital. HYPE holders stake to validators who run the network. We could not verify the legal operator of the front end from a primary source.
Can I lose more than I deposit on Hyperliquid?
Positions are margined with the USDC in your account and liquidated when equity falls below maintenance, so losses normally stop at the collateral. In extreme moves, auto-deleveraging can close profitable opposing positions, and the HLP vault can absorb losses. Funding costs and fees also reduce balances. Read the liquidation docs before using leverage.
How do I withdraw from Hyperliquid?
Use the Withdraw button in the app and follow the steps; funds return to the chain you choose, with possible gas fees. The docs do not publish a standard withdrawal time and mention small gas fees. HLP vault deposits have a 4-day lockup and HYPE unstaking takes 7 days, which are separate queues.
What is the difference between HyperCore and HyperEVM?
HyperCore is the exchange layer: order books, margin and liquidations that execute natively on the chain. HyperEVM is a general-purpose EVM environment where developers deploy ordinary smart contracts and tokens. They run on the same consensus, and assets can move between them, but trading logic lives in HyperCore.

Sources

  1. Hyperliquid docs: HyperCore overview — Hyperliquid (2026-11)
  2. Hyperliquid docs: Fees — Hyperliquid (2026-11-11)
  3. Hyperliquid docs: Core contributors — Hyperliquid (2026-11)
  4. Hyperliquid docs: Protocol vaults (HLP) — Hyperliquid (2026-11)
  5. Hyperliquid docs: HIP-3 builder-deployed perpetuals — Hyperliquid (2026-11)
  6. Hyperliquid docs: Staking — Hyperliquid (2026-11)
  7. Hyperliquid docs: Audits — Hyperliquid (2026-11)
  8. Hyperliquid docs: How to start trading — Hyperliquid (2026-11)
  9. DefiLlama: Hyperliquid TVL — DefiLlama (2026-11-11)
  10. DefiLlama: Hyperliquid Perps fees — DefiLlama (2026-11-11)
  11. CoinGecko API: Hyperliquid — CoinGecko (2026-11-10)
  12. Hyperliquid delists JELLYJELLY memecoin amid whale manipulation fiasco — The Block (2025-03-26)
  13. Trump wants Hyperliquid to enter the US — The Block (2026-09-04)

This profile is for information only and is not investment advice. Company terms, fees and availability change; check the official site before you sign up or move funds.